Purchasing:
– Purchase a quart first instead of a large quantity in case you’re not committed to the color. Paint a piece of foam board and move it across the room to see how the colour is affected by the light at different times of the day.
– Know the square footage of the room you are painting before you head to the store. The pros recommend one gallon for each 400 square feet. Covering unprimed, rough or textured surfaces may need more.
– Do not apply latex on an oil end and vice versa without first sanding the walls (make sure to wear a mask) and wiping off the dust particles with a tack cloth. AquaPainting Apply a primer of the same composition (oil or latex) of the planned topcoat. To tell if your current wall color is water- or oil-based, douse a white cloth with rubbing alcohol and rub it on the wall (in a out-of-the-way spot). If the paint starts to move onto the fabric and dries, it is water based. If the alcohol does not remove any color, it is oil-based.
– Do not underestimate how much time it’ll take you to find the task finished. Allow two weeks to 30 days to cure before draining or washing.
– Paints have volatile organic compounds (VOCs ) that can release toxic gas into the atmosphere for many years after an area has been painted. Paint with low-VOCs or zero-VOCs. -Paints with a green seal possess a VOC of less than 150 grams/liter of non-flat and less than 50 grams/liter for apartment.
– Paint does not stick very well to dirty walls, so clean them with water and soap (or TSP) and wash with water once done. Let dry.
– sterile ceilings before painting. There’ll be dust and cobwebs that you don’t see. Overlap the tape seams by at least an inch to avoid seepage between pieces, and then seal the tape to the face with your fingers or a rag.
– Don’t cover the floors with vinyl as it can be quite slippery. Use old sheets or drop cloths to protect them from drips and splatters.
– The colour mixer at the paint shop can create small variations from can to can. The last thing you want is to have 2 shades of a color on the same wall. This may be remedied by blending each of the paint cans before you begin painting to ensure you will have consistent color throughout the space.
Sand dry spackle every spot.
– Do not underestimate how much time it is going to take you to get the job done. Allow two weeks to 30 days to cure before washing or draining.
– Eliminating outlet covers makes for a far neater paint job. Tape the screws into the cover, and tape over the socket or light switch to keep paint from getting on them.
– Scaffolding comes in components called “dollars” and “cross dollars”. To get a ceiling, four bucks should suffice. Each buck costs about $12 a day to lease. You will also want: walk boards or planks to place along the bucks, these rent for about $10 every per day. -Wheels rent individually. They are significant because they allow you to move the scaffolding with ease. Four wheels rent for about $25 a day.
– If painting a textured ceiling, be sure to use a thick-nap roller to make certain you get complete coverage over the lumps and irregularities in the textured surface. With a shorter or smooth nap, you may use a roller for a smooth drywall ceiling.
DSEQ507_how-to-waterproof-cinderblock_s4x3
Time-Saving Options:
Purchase a good quality edger (they are fairly cheap) and take your time at the corners so that you don’t spend all the excess time taping off everything.
– should you take a break while painting, cover pliers in plastic wrap and refrigerate so that you don’t have to wash them every time you stop.
– Consider skipping the paint trays and utilizing a five-gallon bucket with a roller screen indoors. This saves time on filling and re-filling the bucket.
It allows the paint to trickle back inside the can then pour it out. Do not use natural bristles with water–based paint, the water can make the bristles limp. Foam brushes are good for intricate work like painting molding or window casings. These brushes normally last for only 1 use because they’re hard to clean and easy to tear.
– If your job demands oil-based paint, natural bristles such as ox or hog hair are perfect because they hold paint better than artificial bristles.
– If you’re using latex paint, then polyester and nylon brushes are a lot better because they don’t absorb water like normal fibers.
– Great all-purpose brushes are flagged, meaning that the bristles change in length gradually coming to a peak in the center of the brush. Brushes that are flagged provide a smooth, even coating of paint.
– Use the right roller for your job. Such as wood and wallboard for smooth surfaces, use a roller using a rest. For surfaces with heavy feel, naps that are larger can lessen the number of coats — and the period of time spent painting.
Clean Up:
– Use water and soap to clean latex paint off the brush immediately after painting. If the paint dries on the brush, you are going to need solvents to remove it. If your house is on a sewer system, you can clean the brushes on your sink, but you should be careful not to dispose of paint in an area where it may seep into the groundwater.
– For oil-based paints, you are going to require a solvent like paint thinner or mineral spirits. Pour about two inches of thinner into a metal container and swirl the brush inside until the paint comes off.
– Moist paintbrushes can be wrapped in plastic or waxed paper and sealed with a rubber ring or aluminum foil. Hang brushes upside down to keep their shape.
Be sure to label every container with the color and brand name.
– A common problem known as “hatbanding” occurs when painters use a paintbrush for cutting in and a roller to apply the rest of the paint, thus producing another texture along the ceiling and trim. To stop hatbanding, roll the paint as regions as possible.
from https://pavelink2.wordpress.com/2017/10/06/interior-residential-painting-tricks/
0 Comments
Leave a Reply. |